1) minimum burst pressure
最小爆破压力
2) burst pressure
爆破压力
1.
Study of
burst pressurecalculation method of pipelines with axial flaws;
含轴向缺陷管道的爆破压力计算方法研究
2.
The burst pressureof filament wound pressure vessels and the ratio of strength transfer of fiber;
纤维缠绕压力容器的爆破压力与纤维强度转换率
3.
The prediction of the
burst pressureof pressure vessels with miter pipe
轴向斜接管内压容器爆破压力的预测
3) Explosion Pressure
爆破压力
1.
On the basis of the test results of a full scale hot state explosion test a calculation and analysis was conducted of the explosion pressure of the following: square box test parts, nodular cast iron boiler, grey cast iron boiler and grey cast iron boiler plates.
基于一次大规模热态爆破试验的结果 ,分别对方箱试件、球墨铸铁锅炉的爆破压力、灰口铸铁锅炉和灰口铸铁锅片的爆破压力进行了计算和分析 ,得出安全系数选取的推荐值。
4) bursting pressure
爆破压力
1.
In this article, the influence of thickness reduction due to big deformation for bursting pressureof multilayered cylinder& spherical shells is analyzed.
用强度削弱系数分析了因大变形引起的壁厚减薄对多层容器爆破压力的影响 ,导出了多层圆筒形容器与球形容器爆破压力计算公式。
2.
By using mathematic model and Tresca yield criteria the total yield pressure and bursting pressureof flat ribbon-wound pressure vessel were discussed,the simple calculation formula for bursting pressureof flat ribbon-wound pressure vessel was given,the certification of practical example calculation was made for the accuracy and fineness of the calculated value.
通过数学模型,应用Tresca屈服准则,探讨了扁平绕带式压力容器的全屈服压力和爆破压力,给出了扁平绕带式压力容器爆破压力的简便计算公式,对计算值的准确度和精密度进行了实例计算验证。
3.
Based on that mechanism, the calculation formula for
bursting pressureis derived.
通过实验得出正拱环向开缝型爆破片的破坏机理,由此导出正拱环向开缝型爆破片的爆破压力计算公式。
5) Minimal blow-up solutions
最小爆破解
6) anticracking pressure
耐爆破压力
补充资料：爆破压力
分子式：
CAS号：
性质：容器发生爆破时，所承受的最大压力值。容器发生爆破往往有两种情况，一种是人为的，当容器采用了某种新结构、新材料时而进行的验证试验，将容器加压直至爆破以考核其安全性；另一种只是压力容器因超压产生的容器爆破事故，这种爆破会造成巨大的危害。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条
专业词汇(按中图法分类)