1) fine grained structure
细粒组织
2) connective tissue-type granular cell
结缔组织颗粒细胞
3) grain structure
晶粒组织
1.
The influence of SiC particles on grain structure development during laser rapid solidification;
SiC颗粒对Al-Zn合金激光快凝晶粒组织的影响
4) grain structures
晶粒组织
1.
The computer simulation method of the formation of grain structures of superalloy turbine blade in NDS investment casting processes was discussed It includes physical model of formation of solidification grain structures, two dimensional and three dimensional cellular automata (CA) technique used in modelin
论述了近年来发展起来的非定向凝固高温合金叶片熔模铸造过程中晶粒组织形成的计算机模拟方法 ,包括凝固过程中晶粒组织形成的物理模型、模拟中所采用的二维和三维胞状自动机 (CA)技
2.
In this paper,a two-dimensional simulation method for grain structures of superalloy turbine blade in NDS solidification is discussed.
论述了几年来发展起来的非定向凝固高温合金叶片熔模铸造过程中晶粒组织形成的计算机二维模拟方法,包括凝固过程中晶粒组织形成的物理模型、模拟中所采用的二维胞状自动机(CA)技术。
5) granular structure
粒状组织
1.
Influence of strength of ferrite matrix on yield strength of granular structure steels
铁素体基体强度对粒状组织钢屈服强度的影响
2.
The results show that a granular structure was obtained for the tested steel by furnace cooling,a mixture of granular structure and granular bainite was obtained by aluminim silicate fiber packing cooling,a little amount of granular bainite and lath bainite was obtained by air cooling.
结果表明 ,该钢随炉冷却时主要获得粒状组织 ,用硅酸铝纤维包冷时为粒状组织和粒状贝氏体的混合组织 ,空冷状态下的组织为少量粒状贝氏体和束状贝氏体。
3.
The fracture behaviorof granular structure and granular bainite by low tempering and high tempering in 17Cr2Ni2Mo steel were studied.
研究了17Cr2Ni2Mo钢粒状组织和粒状贝氏体经低温和高温回火后的断裂特性。
6) Globular structure
颗粒组织
补充资料：动物组织网状结缔组织
李瑞端绘
[图]
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条