1) Minimum Focal Length
最小焦距
2) minimum well spacing
最小井距
3) minimum distance
最小距离
1.
Fast calculating minimum distance between point and complex curve with subdivision approximating algorithm
分割逼近法快速求解点到复杂平面曲线最小距离
2.
The minimum distance between two free form surfaces is widely used in selecting the cutter diameter and detecting interference during NC machining of complex part.
曲面间最小距离的求解 ,广泛用于复杂曲面零件数控加工的刀具半径选择和干涉处理中 。
3.
To use the frequency spectrum characteristics in texture classification of remotely sensed imagery,a texture classification algorithm based on minimum distance in frequency space is put forward.
为了将频谱对纹理特性的表征能力应用于遥感图像分类提出了基于频域最小距离遥感图像纹理分类算法。
4) the minimum distance
最小间距
1.
By proposing the conception of critical safety gap and combining the analysis of speed-change lane lengths and lane-change lengths,the kinematics and probability theory are employed to establish the model of the minimum distance between interchanges based on expressway system.
分析了影响城市快速路互通立交间距的各种因素,给出了互通立交间距的基本定义及假设,引入临界安全间隙概念,采用概率论、可接受间隙理论及运动学的方法,在保证车辆安全运行的前提下综合考虑互通立交加、减速车道长度及车辆完成车道变换所需要的基本路段的长度,从系统的角度构建了互通立交最小间距模型。
2.
According to the observation data from Beijing Third-Ring road, the new method to calculate the minimum distance between interchanges on urban expressway is proposed.
分析了对影响城市快速路互通式立交间距的因素，根据道路使用者的心理特性，考虑驾驶员的最不利驾驶状况，并与交通条件相结合，根据北京快速路──三环路的观测数据，提出了城市快速路互通式立交的最小间距值的计算方法。
5) minimal distance
最小距离
1.
Finally,we recognize gesture patterns be means of minimal distance of feature pixels.
将图像的轮廓看成一条曲线,采用HDC(HierarchicalDiscreteCorrelation)方法用一个内核对曲线进行多次平滑,得到曲线的尺度空间,再通过跟踪曲线在尺度空间中的运动找出手势轮廓的关键点,最后通过最小距离法对手势进行识别。
6) minimum spanning distance
最小跨距
1.
Extension on determining the problem of minimum spanning distance between two rollers of conjugate cam mechanism;
共轭凸轮机构两滚子间最小跨距问题讨论的延伸
2.
Via a thorough considering of the structural types-F and P, A sollution to the minimum spanning distance of equidiameter earn mechanism is offered.
全面考虑了共有的Ｆ型和Ｐ型两种结构型式，针对两尖顶或两滚子中心皆位于和皆不位于直动从动杆导路上的两种情况，研究解决了直动从动杆等径平面凸轮机构两浪子中心间的最小跨距问题。
3.
Via considering two earn mechanisms in its entirety-the type F and type P,this paper researches and solves the minimum spanning distance problem of translating follower plane conjugate earn mechanisms.
全面考虑了共有的Ｆ型和Ｐ型两种结构型式，研究解决了直动从动杯共轭平面凸轮机构两滚子中心间的最小跨距问题。
补充资料：最小辐亮度与最小辐照度(见核爆炸火球)
最小辐亮度与最小辐照度(见核爆炸火球)
minimum-brightness and minimum-irradiance
zuixiao fuliangdu yu zuixiaofu乙haodu最小辐亮度与最小辐照度(minimum-brightness and而nimum一irradianee)见核爆炸火球。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条