1) microstructure
[英]['maikrəu,strʌktʃə] [美]['maɪkro,strʌktʃɚ]
金相组织
1.
Difference of Local Corrosion Behaviors of Archaeological Cast Irons with Four Different Microstructures in Soil;
4种不同金相组织的仿古铸铁在土壤中局部腐蚀行为的差异
2.
Effect of Purifying Agent on the Microstructure and Mechanical Properties of Nodular Graphite Cast Iron;
铁神一号净化剂对铸态球铁金相组织和力学性能的影响
3.
Influence of TIG dressing on microstructure and fracture toughness of welding joint;
TIG熔修对焊接接头的金相组织及断裂韧性的影响
2) metallographic structure
金相组织
1.
Effect of water on metallographic structure of fire melted mark;
消防射水对导线火烧熔痕金相组织的影响
2.
Quantitative Discriminability of Metallographic Structure;
金相组织定量识别分析研究
3.
The Identification and Evaluation for the Metallographic Structure of RX63CrMoV51 Material Used for Roll Blank;
轧辊辊坯RX63CrMoV51材料金相组织的识别与评定
3) metallurgical structure
金相组织
1.
Analysis on founding metallurgical structure shows causes of turbine blade foundry and hot treatment defects.
本文分析了水轮机组叶片铸造缺陷的产生原因和防止措施,水轮机组不锈钢叶片铸造裂纹的形成是由于铸造热应力和组织应力过大,超过材料的抗拉强度,通过对铸态下的金相组织分析,找出了水轮机叶片铸造与热处理缺陷产生的原因,并提出了改进措施。
2.
The corresponding metallurgical structure,hardness,bend tests and impact toughness of overlay metal,and porosity,anti-heat shock performance of coating were analyzed.
将电弧超声引入堆焊和热喷涂工艺,进行常规堆焊、等离子喷涂和引入电弧超声技术的对比试验,比较其堆焊层的金相组织、硬度、抗弯性能、冲击韧度和热障涂层的孔隙率、抗热震性能,结果表明:电弧超声的加入能够细化堆焊接头的熔合区组织,降低脆硬倾向,改善堆焊接头的抗弯性能和冲击韧性;由于超声波的空化效应、热效应和机械效应,电弧超声改善了喷涂过程的雾化效果,减小了熔滴的颗粒度和涂层中弥散气孔的尺寸,提高了热障涂层的抗热震性能。
3.
Combined theoretical analysis with experiments,effects of technology parameters and different scanning routes on warp,crack and balling phenomenon were investigated;In addition,the relations between chemistry composition,cooling rate and metallurgical structure,microhardness are analyzed for supplying theory guidance and experimental basis.
针对金属零件在选择性激光熔化成形过程中容易产生翘曲变形、裂纹与球化现象等问题,在理论分析与试验的基础上,探讨了其工艺参数与扫描路径对金属粉末在熔化成形中翘曲变形、裂纹与球化的影响,以及化学成分、熔池冷却速度与制件金相组织、显微硬度的关系,为选择性激光熔化技术的发展提供理论指导与实验依据。
5) Metallographic Organization
金相组织
1.
Through observing the macro-fractographic,micro-fractographic,metallographic organization and inspecting the chemical composition and hardness of the spring steel,the fracture failure reason of keep-spring is analyzed.
观察了弹簧断口的宏观痕迹、微观形态,检测了金相组织以及弹簧钢的化学成分及硬度,分析了保持弹簧断裂失效的原因。
6) microstructure examination
金相组织检验
1.
Through mechanics test, stress test, hardness test, microstructure examination and fatigued test of remelting welded joints for crane girder, the result showed TIG remelting technique could largely reduced residual stress of welded joint and improved anti-fatigued capability of welded joint.
通过力学性能测试,应力测试,硬度测试,金相组织检验及疲劳试验证明,吊车梁采用TIG重熔加固技术,能够大幅度降低焊接接头的残余应力,显著提高接头的疲劳性能,重熔后的焊接接头具有良好的综合性能。
补充资料：金相检查
metallographicexamination：用金相方法对金属或合金的宏观组织和显微组织进行的分析、研究或检验。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条