说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 钻孔速度
1)  the speed of drilling hole
钻孔速度
1.
This paper analyses the main factors that influence the speed of drilling hole,puts forward the methods to settle the main working parameters of the rotary drill.
分析了影响牙轮钻机钻孔速度的主要因素,提出了钻机主要工作参数的确定方法。
2)  High speed drilling
高速钻孔
3)  drilling rock rate
钻孔速率
1.
To improve highway tunnel s rock stability classification,the authors introduced the drilling rock rate as included in the classical surrounding rock stability appraisal system,developed a new classification method based on improved back-propagation ANN and considering drilling rock rate.
为了有效的进行公路隧道围岩稳定性超前分类,将台车钻孔速率引入到围岩稳定性评价指标体系中,通过增加动量因子和设置自适应调整学习率的方法建立了改进型BP神经网络的围岩分类模型。
4)  initial speed from borehole gas emission
钻孔瓦斯涌出初速度
1.
The main factors affecting the initial speed are studied and the causes of initial speed from borehole gas emission often exceeding limit theoretically explained.
突出煤层卸压后用钻孔瓦斯涌出初速度进行工作面预测和效果检验时经常超过突出临界值,造成开采保护层后煤层突出危险性更大的现象。
5)  drill precision
钻孔精度
1.
This article based on the engineering practice, analyzes five main factors affecting the excessive or insufficient excavation:drill precision, the act of measuring, blasting technology, the geology of wall rock and real - time management, and the .
结合具体工程实践,分析了影响隧道超欠挖产生的五个主要因素,即围岩地质条件、钻孔精度、测量放线、爆破技术和现场管理等,并有针对性地提出了控制隧道超欠挖所应采取的技术措施。
6)  bore length
钻孔长度
补充资料:地表钻孔抽水


地表钻孔抽水
dewatering through well

d{bjoo之uankong ehoushu}地表钻孔抽水(dewatering through well)为了解除矿区地下水害威胁,在地表矿区边界之外的来水方向上围绕矿体开凿若干个大直径钻孔,在钻孔内安放深井泵或潜水泵排水,使矿区开采地段处于疏干降落漏斗水面之上的疏干方法。钻孔布置见矿山深井降水孔平面图。钻孔直径D可按公式D一d十50+2 了尸·、’· 户。’\。。/ 望‘,卜’。 户)’力价 /{/。一、\ 匕一办’\ 矿山深井降水孔的平面图 l一来水方向;2一抽水钻孔; 3矿区;4一隔水层(a十b)计算。其中d为水泵的最大外径,mm;。为过滤管的厚度,mm;b为充填料的厚度,mm。地表钻孔抽水疏干在地表进行,施工简单、方便,劳动条件好、施工管理容易,钻孔的布置及疏水设备的迁移都比较灵活。因此,在条件允许的情况下,应该尽量采用地表钻孔抽水,疏干矿床。 (张福有)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条