1.
Error Analysis and Control Methord in Five-coordinate NC Machining for Curved Surfaces
五坐标曲面数控加工误差分析及控制方法
2.
Tool Path Planning Algorithm for Five-axis NC Machining of Sculptured Surfaces With End Mill
五坐标端铣刀加工复杂曲面轨迹的规划
3.
The value of the new Cordinate Systems and surfaces is twofold.
新坐标系和坐标曲面的价值是双重的。
4.
areal coordinates
重心坐标, 面坐标
5.
The point at which a line, or the curve in which a surface, intersects a coordinate plane.
交点，交线线与坐标平面相交的点或一表面与坐标平面相交的曲线
6.
Research on the Online Detecting System for Vision Coordinate of Thermal Abnormity Surface;
异形曲面视觉坐标在线热检系统研究
7.
Tool - location Analysis of the Globe Tool on the Three - axis Curved Cutting Face;
三坐标曲面加工中球形刀的刀位分析
8.
The Study of Polar Coordinates Curve and the Area of the Planar Figure Surrounded by This Curve;
浅析极坐标曲线及其所围平面图形的面积
9.
The Surface Matching and Probe Compensation for CMM
三坐标测量机的曲面匹配与测头半径修正
10.
Research and practice on surface numerical base on CMM
基于三坐标测量机的曲面数字化研究与实践
11.
The Modeling and Simulation for Coordinate Measuring of Complex Surface in Reverse Engineering;
反求工程中复杂曲面坐标测量的建模与仿真
12.
Study on the Modeling and Multi-axis NC Machining Technology for Freeform Surface Blade;
叶片曲面造型与多坐标数控加工技术研究
13.
Coordinate Conversion Based on Surface Interpolation and Research on Its Application;
基于曲面插值的坐标变换及其应用研究
14.
Effect of Secondary Warping on Location of Shear Center
次翘曲对角钢和T形截面剪切中心坐标的影响
15.
Research on Technology of Surface Digitization Based on CMM
基于三坐标测量机的曲面数字化方法研究
16.
Modification of 2D shallow water and water quality model in curvilinear coordinates
曲线坐标系下平面二维水流水质模型的修正
17.
Step distance improvement for free-form surfaces finishing in 3-axis machining
三坐标自由曲面精加工中的步进优化方法
18.
Research on the Five-Axis NURBS Spline Curve Interpolation Algorithm and the Acceleration Deceleration Control Method
五坐标NURBS样条曲线插补算法及加减速控制方法研究