1.
Study of Roller Vibration in Rolling Processes of Cold Tandem Rolling;
冷连轧机轧制过程中轧辊振动的研究
2.
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
薄板坯连铸连轧（CSP）轧制区组织模拟
3.
Brief Introduction of Continuous Rolling Process and Pass System in Continuous Rolling Bar Plant
连轧棒材厂连轧工艺及孔型系统简介
4.
Application of the technique of four-strand splitting rolling for bar rolling
四切分棒材轧制技术在连轧厂的应用
5.
Comprehensive Evaluation of Strength and Stiffness about Rolling Mill Main Drive System of Mandrel Mill Group;
连轧管机组轧机系统强度的综合评价
6.
Study and Design on Rolling Date MIS in Tandem Cold Rolling;
冷连轧机轧制数据MIS的研究与开发
7.
Research on Roll Eccentricity Compensation Algorithm and Simulation in Hot Rolling;
热连轧轧辊偏心补偿算法及仿真研究
8.
Design of Roll Shape for 8 High Roll of TCM
八辊冷连轧轧机的一种辊型曲线设计
9.
Analysis and Optimization of the Speed Control for Roughing Mill of Hot Strip Mill
热连轧粗轧机速度控制的分析与优化
10.
Pre-rolling Calculation Based on RBF Neural Network
基于RBF神经网络的热连轧轧前计算
11.
Flying shears control model for 1580mm hot strip mill in the Third Hot Rolling Plant of WISCO
武钢三热轧1580mm热连轧机飞剪控制模型
12.
Coilbox can make coil in tandem opration with rougher and also while uncoil the strip is being in finish mill.
生产过程中热卷箱需要与粗轧机形成连轧连卷,又要与精轧机形成连开连轧的工况。
13.
Introduction to φ258 PQF continuous pipe rolling mill newly built at Tianjin Pipe (Group) Corp.
天钢φ258PQF连轧管机组介绍
14.
Tube Casing Steel J55 is Produced in FTSR
薄板坯连铸连轧生产石油套管用J55热轧钢带
15.
Model and Algorithm for Steelmaking-Continuous Casting Scheduling in DHCR and CCR Environment
连铸连轧和冷装热轧并存环境下的炼钢-连铸生产调度模型与算法
16.
Casting Wheel for Non-ferrous casting & Rolling.
有色金属连铸连轧用结晶铸轮
17.
Analysis and Improvement on Surface Quality of CC Round Billet for Pipe－rolling with Mandrel Mill
连铸连轧圆管坯表面质量分析与改进
18.
Study on the Technical Problems of Continuous Casting and Rolling for Aluminum Wire Rod;
连铸连轧电工铝杆工艺相关问题研究