1.
Study on Heat Treatment Techniques for Homogenizing the Annealed Structure of H13 Steel
H13模块退火组织均匀化热处理工艺试验研究
2.
Organization Uniformization Extrusion and Microstructure Evolution Simulation of Casting AZ31 Magnesium Alloy;
连铸AZ31镁合金组织均匀化挤压及其微观组织演变模拟
3.
Organization Uniformization Extrusion and Microstructure Evolution Simulation of Casting AZ91D Magnesium Alloy;
铸态AZ91D镁合金组织均匀化挤压及其微观组织演变模拟
4.
Microstructural Homogeneity in Hypereutectic High Cr Cast Iron by Semi-solid Rheo-extrusion
半固态流变挤压过共晶高铬铸铁组织均匀性分析
5.
The initial microstructure was found to be fine duplex microstructure.
蠕变前合金的显微组织为均匀细小的双态组织。
6.
material that has been homogenized (especially tissue that has been ground and mixed).
被混合均匀的材料（尤指磨碎并混合的组织）。
7.
Microstructural Evolution of As-cast and Homogenized 2D70 Aluminum Alloy
2D70铝合金铸态及均匀化态的显微组织演变
8.
Influence of Homogenization on Microstructure of AZ151 Mg Alloy
均匀化热处理对AZ151镁合金显微组织的影响
9.
Diffusional homogenization treatment of Ni-Cr-Mo-Cu corrosion resistance alloy and evolutions of its microstructure and properties
镍基耐蚀合金扩散均匀化处理及组织性能演变
10.
Centrifugal casting，compact structure，free from pinhole porosity and slag，smooth surface and even wall thickness.
高速离心铸造,组织致密,无砂眼、夹渣，表面光滑、壁厚均匀。
11.
Centrifugal casting, compact structure, free from pinhole porosity and slag, smooth surface and even wall thickness.
高速离心铸造，组织致密，无砂眼、渣，表面光滑、厚均匀。
12.
The loss of PTEN in malignant transformation of the nasopharyngeal carcinoma was not uniform and mainly occurred in late clinical stage.
PTEN在鼻咽癌组织上皮细胞恶性转化过程中的缺失是不均匀的；
13.
⑦fallopian tube pregnancies(n=2) took up masses in round or cord shape,the low density foci can be found out of the midst of the masses.
⑦输卵管妊娠(n=2)为不均匀强化的圆形或条形软组织肿块。
14.
Large eutectic ledeburite is not found.
合金层中的碳化物细小、均匀、弥散,无粗大的共晶莱氏体组织。
15.
Numerical Study on the Constant Temperature Environment and Air Distribution of Nano-Scale Measurement;
微纳米测量环境恒温气流组织及均匀温度场数值模拟
16.
Research on Tissue Inhomogeneity Correction and Dose Model for Irregular Fields in Radiation Therapy;
放射治疗组织不均匀性剂量校正与不规则野剂量模型研究
17.
Research on Inhomogeneity of Microstructure and Mechanical Properties for 2A50 Aluminum Alloy Prepared by Thixoforging
2A50铝合金半固态模锻成形的组织性能不均匀性研究
18.
Effects of homogenizing annealing on microstructure and properties of hypereutectic Al-17Si alloy
均匀化退火对过共晶Al-17Si合金组织和性能的影响