creo通用补丁包(注册文件)

使用方法：

PTC Creo 1.0 (2.0) Mxxx 32/64bit patcher (by SSQ)
1.  Open ptc_licfile.dat with any txt-editor and replace every occurrence of 00-00-00-00-00-00 with you network
card MAC-address (shown in the bottom left corner of the Creo setup)
2.  Install Creo 1.0 (2.0) Mxxx 32/64bit (Parametric, Direct, Simulate, Distributed Services Manager) using
ptc_licfile.dat as node-locked license (no Server running)
3.  Run PTC_Creo_Patcher_SSQ.exe
ATTENTION!  On Vista/Win7 you mast run it as Administrator! (right mouse click > run as Administrator)
4.  Click Look For.. 
5.  For Creo Parametric, Direct or Simulate browse to< Creo 1.0 (2.0) Mxxx root directory>
(by default C:\Program Files\PTC\Creo 1.0(2.0)\Common Files\Mxxx\) and click Look For.. 
6.  Be sure that you’ve got a right path in Program Directory tab Click Start 
7.  Wait for window All files seem to be patched. Enjoy! Click OK 
8.  For Creo  Distributed Services Manager browse to< Creo 1.0 (2.0) Distributed Services Manager root directory>
(by default C:\Program Files\PTC\Creo 1.0(2.0)\Creo Distributed Services Manager \) and click Look For.. 
9.  Be sure that you’ve got a right path in Program Directory tab Click Start 
10. Wait for window All files seem to be patched. Enjoy! Click OK 
That’s all… Enjoy!
Team-SolidSQUAD (SSQ)
简单翻译：
该文件适用于creo1.0和creo2.0各个MXX版本的程序。
1 用记事本打开ptc_licfile.dat 文件，然后将里面的00-00-00-00-00-00 替换为自己的网卡号（网卡号，在你打开creo安装程序时，右下角显示的即为网卡号)
2 安装creo程序(Parametric, Direct, Simulate, Distributed Services Manager) ,在选择许可证的时候，选择我们刚才修改好的文件
3 运行 PTC_Creo_Patcher_SSQ.exe（如果你的电脑为win7或者win8系统必须右键以管理员身份运行)
4 点击 look for （查找)

5 找到 Creo Parametric, Direct or Simulate 的安装目录， C:\Program Files\PTC\Creo 1.0(2.0)\Common Files\Mxxx\，（你的creo安装到哪里这里就选择哪里）
 

• 上一篇：Creo2.0免费下载(正式版)百度网盘
• 下一篇：Creo3.0正式版软件下载（百度网盘）